Whole wheat bread, milled grain,



Thursday 01/21/2010 9:30 PM ↓


↑ I used the coffee grinder because I'm not ready to bring out the mill. It's noisy and it's late, and I'm a little bit tired and not in the mood for it.

Friday 01/22/2010 10:00 AM ↓


↑ The dark line in the water of the starter is a good sign. It was the only indication of activity. No odor. The mixture was stirred.

I learned soft wheat mills MUCH faster than hard wheat. It goes so fast it almost takes the fun out of it. I also learned with the collar on, filled to the brim (6LBS. 5OZ) is the maximum the bowl can contain. At the very end it started to shoot out creating a flour cloud in the kitchen. That's bad.

Friday 01/22/2010 9:30 PM. ↓


↑ The slurry is doing something weird. It's clumping in a stringy mass as if its gluten is coalescing but it's not incorporating all of the water evenly. There is not yet any discernible odor.

Saturday 01/23/2010 9:30 AM↓


↑ Completely foamed. I do not understand the dark line of liquid in the middle marking the jar. Inside the jar, the mass was a complete pile of foam. This was a granular foam produced by the grain roughly milled in the coffee grinder. Still no discernible odor, but then again, it is a mustard jar. Two rounded tablespoons milled flour added plus three tablespoons filtered water. Enough to approximately double the mass of slurry. This is its first actual feeding following the activation of the organisms.

Sunday 01/24/2010 9:30AM 24 hours after first feeding. Still no aroma. ↓


Sunday 01//24/2010 1:00PM 28 hours after first feeding. ↓ The water keeps separating out no matter how thoroughly I stir it. It appears inert. No aroma whatsoever. I fed it two rounded tablespoons flour with no fresh water in order to stiffen the slurry into a viscosity of loose sponge. This is the jar after the two tablespoons were added. This amounts to a second feeding, but in my mind it's still the first feeding since the water has not been increased. That is, it's not a proper doubling of the mass, both flour and liquid. Hey, it's the way this goes, you gotta improvise sometimes. But I tell ya, I'm beginning to wonder if this grain has any yeast and bacteria organisms on it. But then other thoughts take over that makes me calm down, what I know to be true about grain. Unless the whole batch of grain was irradiated which doesn't seem possible. Gassed? Nah. James Peterson writes about creating starter in both his books, Cooking and Baking. Apparently he's getting his information from San Francisco Bay area bakers who disagree on many things but do all agree that it can take up to a week to get going. What James says in his two books coincides with my own experience. I find it curious that none of the bakers mention anything about using heat to assist the start. That's the reason why I'm not using heat this time -- because none of them do and because I've never tried it.



Sunday 01/24/2010 11:45 PM Second feeding twenty six hours after the first feeding, ten hours and forty-five minutes after the augmentation of the first feeding. Up there when flour was added to correct the slurry which kept separating. The jar looks like this ↑ before it was fed and it look like this ↓ after it was fed. The small jar above contained just a little more than 1/2 cup foamy slurry. The mixture fed with a little more than 1/2 cup filtered water and sufficient whole wheat to form a stiff mixture. Stiff because the mixture tends to separate out and I hoped to prevent that. This container ↓ contains a little over 2 cups stiff slurry. It's been three full days, so progress isn't that bad so far.


Monday 01/25/2010 2:00PM. fourteen hours following the second feeding ↓. There's nothing magical about twelve hours, or twenty-four hours, or thirty-six. This starter is now more than double its previous mass. The volume of water has was doubled to its previous mass, then sufficient flour to form a stiff sponge rather than a loose sponge as before. It has formed bubbles but not as yet so much as to bulge the top of the container. Its two cups of content has risen by one cup so it has not yet doubled in volume. It's active, but not all that active. I photographed it, but I'm not doing anything to it.


When I read James Peterson's take on whole-wheat sourdough bread it sounded to me familiar to what Harold McGee wrote in On Food and Cooking. Peterson says in his book Baking that cooks mix bread flour with whole-wheat flour because the ground husks present in the whole-wheat cut the gluten protein strands. For my loaves, I intend to mix a portion of my preferred all purpose flour because the high-protein bread flour available to me in bulk is too high in protein. The bread it produces always comes out more like bagels, dense, compact, with fine tight bubbles rather than open crumb that I'm looking for. Although alternatively I do have King Arthur bread flour and whole-wheat flour, I'm not going to use either of them.

I'm considering mixing the all-purpose flour that is intended for the bread into the next feeding of this starter so that the organisms it carryies can get into the act too. I'd expect it to show greater lift right off. But I'm torn. Another thing I want to try is to develop a loaf of bread that is 100% whole wheat straight from sponge. I wonder what it would be like if it were baked without being stiffened or kneaded, similar to bread from batter risen with chemical leaven like banana bread or zucchini bread. Maybe I'll divide this starter and do both. [edit: the story of how that separate loaf turned out is told in an earlier post here. Earlier, because it didn't take the proofing period that delayed this batch.] As for now, I'll leave it to develop at its own leisurely pace. I won't bother it until I observe it become exhausted no matter how long that takes.

Monday 01/25/2010 11:35PM Activity appears to have stopped. The volume has doubled to four cups. The tight sponge has loosened. It's foamy and stirs back to two cups volume.

Third feeding. One cup filtered water was added doubling its liquid portion to two cups. Two cups all purpose flour was added, doubling its flour portion. It is now approximately two cups water, two cups whole-wheat flour, and two cups all purpose flour. ↓ and ↓↓.



Tuesday 01/26/2010 2:30 PM Fifteen hours following the last feeding the sponge looks like this ↓.


It was fed with one and a half cups of water ↓, which is slightly less than double the weight of the liquid portion before being fed. I don't know why I held back. I suppose I didn't want a a huge pile of sponge nor a bunch of loaves. The flour added sufficient to produce a stiff dough is 50% all purpose flour and 50% whole wheat milled at home.

Plus salt by the spoonful until the bulk appeared to be sufficiently salted. I just guessed.



I processed it with the lid on but it doesn't photograph as interestingly that way. the machine because it bounces around so much it would jump off the counter if I didn't.


Friday 01/29/2010 10:00AM What follows is post-fermentation series.

I always hesitated taking the dough out of the refrigerator before the next morning because I imagined it might warm too quickly and overproof before I woke up. I risked that this time. Removed at 2:00 AM Friday morning before going to sleep. Checked it at 9:00AM the same morning and the bowl was still cold. It didn't begin to actually warm up until it was divided and stretched.

The photos below show the dough divided, stretched, folded, and shaped. It seemed a little too stiff to suit me so I moistened it between layers during folding. (I hope you appreciate the drag it was of photographing this, I had rinse my hands for each frame to protect the camera.) The dough is not bouncy and alive the way I like it. Rather it seems lifeless. That tells me the yeast organisms are still mostly in suspension. WAKE UP ALREADY!


Brief relaxing/proofing period while the oven and the cloche gets hot as it will go





That's it for the dough. All gone. Kaput. I did not reserve a portion to use as starter for future bread and that's a shame because I sure love that 100% whole wheat down there in a previous post from this same experiment. (It zoomed ahead of this batch because it didn't have the two and a half day fermentation period.)

But wait!

There is still the bits that were stuck to the bowl that can be salvaged. (I have it on good authority (TV show) a similar thing happened at the famed La Brea Bakery. A disgruntled employee, a true malcontent, a ne'er do well, a slacker, dumped the bakery's mother dough out onto the street. Litterer! Another quick-thinking (and probably desperate) employee dashed out onto the street and salvaged a tablespoon before it was totally destroyed then used it to inoculate a new batch restoring the full mass within a few days. So the story goes.) It's not 100% whole wheat. The trace amount is 50/50 all purpose and milled wheat along with salt and olive oil from the bowl, and those things do go against the concept of pristine purity, but the amount is so tiny that eventually it won't matter at all once it gets going again and doubled several times. The amount starting out is so neglegible it doesn't even fill the bottom of the jar. You'll see what happens to this later on. It just saves me the trouble of starting over from scratch. Which actually is no trouble at all, on the contrary it's fun. So what it saves is time and I don't actually care about that.

No comments:

Blog Archive